Skip to Content

Carrollton Commercial HVAC Rooftop Install

Integrity Air Conditioning offers high efficiency furnaces for your Dallas TX home.


Integrity Air Conditioning was in Carrollton last week installing a new rooftop HVAC unit for a local business.

The business owners can now look forward to a very comfortable cold weather season – wintering in a warm, draft-free office space with lower energy costs and a more quiet operation. The business will enjoy a very cozy winter – and pay less on energy bills! And of course, in the warmer months – the office area will be cool and comfortable.

HVAC Right-Sized Unit: Saving Money with Best Indoor Comfort

Installing an a/c or heating unit that is too small for the space results in higher energy bills; and hot or cold spots. Surprisingly, installing an a/c or heating unit that is too large is also not good.

Units too large for the space can result in hot and cold spots; as the unit clicks off and on too rapidly. And in climates with summer high humidity (like the Dallas area) – over-size a/c units leave more moisture in the indoor environment. This is because cooling is accomplished in a short period of time. And the unit does not run long enough to remove adequate humidity. The resulting indoor summer humidity level is not comfortable and is not helpful for allergies.

Need a right-sized commercial HVAC system or residential central a/c and heating system?

HVAC Rooftop System Installation

This installation required a crane and careful planning. Integrity A/C was there and got it done right!

Just another exciting day at Integrity Air Conditioning – keeping the Dallas area cool in summer and warm in winter – one home and business at a time!Carrollton Commercial HVAC Rooftop InstallCarrollton Commercial HVAC Rooftop InstallCarrollton Commercial HVAC Rooftop InstallCarrollton Commercial HVAC Rooftop InstallCarrollton Commercial HVAC Rooftop Install

Carrollton Commercial HVAC Rooftop Install

Integrity Air Conditioning Also Installs a Variety of Residential Furnace Types in the Dallas Area:

Gas furnaces
Electric furnaces
Propane furnaces
Heat pump systems

We Work With All Brands and Recommend the Best Heating Solutions for Your Space

It’s important NOT to take a “one-size-fits-all” approach when upgrading and installing a heating system.

To get the best efficiency, comfort and overall value, Integrity Air Conditioning takes the time to design a “right-sized” heating system for your unique requirements. We recommend heating systems and central a/c – heating systems that are specific for your home’s heating needs – and your budget.

Finance Options Available, Residential and Commercial

To assist with your budget requirements, check out our low interest and no interest Finance Options. (Subject to credit approval).

Save Money with More Comfort: Benefits of a Correctly Installed Energy-Efficient Heating System

Improperly installed heating equipment can reduce the efficiency of your system by as much as 30 percent. Integrity Air Conditioning techs expertly and carefully install each heating system to meet the needs of your space and the equipment specifications.

Older furnace systems are not as energy efficient and cost more each month to keep homes warm.

Our heating services are available for homeowners and commercial customers in Dallas, Garland, Mesquite, Richardson, Rockwall, Plano, Frisco, Waxahachie, Grand Prairie, Carrollton, Euless and surrounding areas.

Call Integrity Air Conditioning at (972) 435-7593 or contact us online for a Free Estimate for your new heating system – or central a/c and heating system – installation.

When is it time to replace a furnace?


Certain telltale signs indicate it’s time to consider replacing heating and cooling equipment, or improving the performance of your overall system. It may be time to call a professional contractor to help you make a change if:

Your heat pump or air conditioner is more than 10 years old.

Consider replacing it with a unit that has earned the ENERGY STAR label. Installed correctly, these high-efficiency units can save up to 20 percent on heating and cooling costs.

Your furnace or boiler is more than 15 years old.

Consider replacing with an ENERGY STAR qualified furnace, which is 15% more efficient than a conventional furnace. If you have a boiler, consider replacing with an ENERGY STAR qualified boiler that is 5% more efficient than a new, standard model.

Your equipment needs frequent repairs and your energy bills are going up.

Your cooling or heating equipment may have become less efficient.

Some rooms in your home are too hot or too cold.

Improper equipment operation, duct problems or inadequate insulation could be the cause.

No one is home for long periods of the day and you do not have a programmable thermostat.

Install a programmable thermostat or have a good contractor install one and instruct you on its use — to start saving energy and money while they’re away or sleeping.

Your home has humidity problems.

Poor equipment operation, inadequate equipment, and leaky ductwork can cause the air to be too dry in the winter or too humid in the summer.

Your home has excessive dust.

Leaky ducts can pull particles and air from attics, crawl spaces and basements and distribute them throughout your house. Sealing your ducts may be a solution.

Your heating or cooling system is noisy.

You could have an undersized duct system or a problem with the indoor coil of your cooling equipment.

Don’t be caught without a working furnace: save money and time now with our Furnace Tune Up Coupon (or A/C Tune Up Coupon) Special.

Maintain Your Furnace and A/C Once Yearly

Increase A/C or Furnace Efficiency

Lower Energy Bills

Extend the Life of Air Conditioning System or Furnace

Ensure the Safety of your Furnace – and your Family

Reduce Allergies and Improve Indoor Air Quality

Heating Tune Up 20 Point Process – Furnace Tune Ups keep you safe!

Electric furnaces need maintenance to run efficiently. Gas furnaces burn fuel to produce heat. Even a small problem can lead to gas leaking into your home – or dangerous carbon monoxide levels.

  • Inspect and tighten electrical connections
  • Check volt/amps on meters
  • Inspect and check safeties and controls
  • Check for air leaks around indoor equipment
  • Inspect indoor blower and motor
  • Test for carbon monoxide
  • Inspect heat exchanger
  • Clean or replace existing filter (provided by client)
  • Check refrigerant (Heat Pump Only)
  • Inspect pilot assembly
  • Check for obvious refrigerant leaks
  • Inspect indoor coil
  • Clean outdoor coil (Heat Pump Only)
  • Inspect and adjust burner if needed
  • Inspect and test gas valve
  • Inspect flue for cracks and obstructions
  • Check operation and condition of compressor (Heat Pump Only)
  • Check operation of thermostat
  • Inspect ductwork
  • Inform customer of findings and recommendations
Share To:

Contact Our Team Today

Make Your Home Comfort Our Priority
  • Please enter your first name.
  • Please enter your last name.
  • Please enter your phone number.
    This isn't a valid phone number.
  • Please enter your email address.
    This isn't a valid email address.
  • Please lookup your address.
  • Please make a selection.
  • Please enter a message.
  • By submitting, you agree to be contacted about your request & other information using automated technology. Message frequency varies. Msg & data rates may apply. Text STOP to cancel. Acceptable Use Policy