Residential and Commercial, Dallas, TX
Heat pump systems
It’s important NOT to take a “one-size-fits-all” approach when upgrading and installing a heating system.
To get the best efficiency, comfort, and overall value, Integrity Air Conditioning takes the time to design a “right-sized” heating system for your unique requirements. We recommend heating systems that are specific for your home’s heating needs – and your budget.
To assist with your budget requirements, check out our special Finance Options. (Subject to credit approval).
Improperly installed heating equipment can reduce the efficiency of your system by as much as 30 percent. Integrity Air Conditioning techs expertly and carefully install each heating system to meet the needs of your space and the equipment specifications.
Our heating services are available for homeowners and commercial customers in Dallas, Garland, Mesquite, Rockwall, Plano, and surrounding areas.
Call Integrity Air Conditioning at (972) 270-1244 or contact us online for a Free Estimate for your new air heating system installation.
The most common types of furnace in the Dallas area are natural gas or electric. Heat pump systems are increasingly popular. It is possible to switch fuel types when installing a new furnace. For example, you could replace an electric furnace with a natural gas furnace.
Heating and cooling systems are the biggest energy expense in most homes, accounting for 40% to 50% of total energy expenses. It’s important to understand that just because you buy a new furnace, doesn’t mean it will be high efficiency.
Installing the highest efficiency furnace you can is always a good choice. We will recommend several options for your specific needs – and your budget. Higher efficiency systems cost a bit more in the beginning but pay for themselves many times over. Lower energy costs save money for the life of the furnace.
A low-efficiency furnace sends much of the heat from its energy source up the chimney and needs a metal exhaust pipe vented to a chimney. Higher efficiency furnace systems extract nearly all the heat from their fuel. Exhaust gases are cool enough to vent outside through a plastic pipe.
We inspect your ductwork before a furnace install and will let you know if we find any problems.
If the ductwork system in your home has leaks or blockages – your money is literally escaping as hot air!
Furnaces distribute hot air in a ductwork system all throughout the house. It is critical that ductwork is properly installed and sealed. Unfortunately, even in new homes the ductwork may not be correctly installed.
We have seen crimped ductwork, leaking ductwork, older ductwork that is literally falling apart – and more.
Call (972) 270-1244 or contact us today for a Free Estimate on furnace replacement and install for an energy-efficient furnace in Dallas, Garland, Mesquite, Plano, and the surrounding areas.
BTU output. The heat output of a furnace is listed in thousands of BTUs (80,000 BTU, for example) and indicates the amount of heat energy the unit can produce.
Annual Fuel Utilization Efficiency. A standard measure of efficiency for furnaces, AFUE tells you the percentage of input energy the furnace can convert to output energy for warming your home.
Configuration. A “high-boy” furnace is a tall model with the blower located under the heat exchanger. A “low-boy” furnace has the blower in the back of the heat exchanger, making it shorter.
Combustion. A “sealed combustion” furnace, also known as a high-efficiency furnace, requires no chimney and no indoor air for combustion. Instead, outside air is brought in through a small pipe to provide oxygen for combustion, and flue gases are vented directly outside. Old-style “atmospheric combustion” furnaces require a metal chimney and rely on indoor air for combustion. A sealed combustion furnace is more suitable for a tight, well-insulated house.
A furnace boiler or water heater burns fuel to generate heat and needs to put that heat into an air stream in your ducts, or into the water in your pipes. The efficiency rating is what percentage of that heat gets into your air or water.
What happens to the rest of the heat? It goes up the chimney and is lost into the sky. Therefore, a 15-year-old furnace that is 65% efficient is putting 35% of the heat you paid for up the chimney.
A 96% efficient furnace only “wastes” 4%! A big difference! And since the cost of the fuel you put through a furnace during its lifetime is much greater than the cost of the unit itself, it’s worth it to install the very highest efficiency equipment available.
Integrity Air Conditioning helps you save money and be more comfortable year-round!
We will evaluate your current heating system and provide a free quote on a super-efficient upgraded system that will save you money.
Integrity Air Conditioning is your Dallas HVAC company providing furnace install, repair and maintenance in Dallas, Plano, Frisco, Garland, Richardson, Irving, Mesquite, Rockwall, Wylie, Sachse, Forney, Sunnyvale, Waxahachie – and other Dallas Area cities.
For a free quote on a new heating system – or for a quote to replace both heating and air conditioning systems – call (972) 270-1244 or contact us today.